The official baseline for a 50 kW system
The Department for Energy Security and Net Zero publishes the installed cost of every solar system registered on the MCS installation database; the release of 28 May 2026 covers the 2025/26 financial year and is the only official cost series for UK solar. Its limits matter: it covers installations up to 50 kW and all building types, not farm buildings alone.
For an array of this size the official series applies directly. At DESNZ’s 2025/26 non-domestic mean of £1,167.29 per kW for 10–50 kW installations, the baseline for 50 kW is £58,364: the starting point before the site-specific items below, not a quote.
The full series, with the regional means, is on the farm solar cost guide.
How big is a 50 kW array?
50 kW is about 112 modules of 450 W. At 1.998 m² a module (1762 × 1134 mm) that is roughly 224 m² of roof, and at 21.0 kg a module the modules alone weigh about 2.4 tonnes. Both figures come from the Trina Vertex S+ datasheet (version TSM_EN_2023_D); racking, cables and any ballast are extra, and the roof structure has to carry the whole. How to check that is in solar panel weight and roof loading on farm buildings. An array of this size usually suits a dairy parlour with its adjoining shed, a workshop, or a single livestock building.
What a 50 kW array generates
At 900 kWh per kWp a year, which sits between the PVGIS figures for Cardiff (946) and Manchester (807) on a 10° roof, a 50 kW array generates about 45,000 kWh a year. What that is worth depends on how much is used on site and what the farm pays per unit, which come from your own half-hourly data and bills, and on the export rate for the rest; no generic payback figure is given here because none can be sourced. Yields by region are in PVGIS yields for farm roofs by region.
What moves a 50 kW quote
- The roof. An asbestos cement roof is overclad or replaced before panels go on; see overclad or strip an asbestos cement farm roof and solar panels on asbestos cement farm roofs.
- The structure. The frame and purlins have to carry the added load; a structural assessment is the document to ask for.
- The electrical supply and grid connection. Three-phase supply and the G99 application to the DNO; the DNO quotes its own study and works charges. See DNO grid connection for rural farm solar.
- Access and roof safety. Platform or scaffold access, edge protection and, on fragile roofs, netting under the Work at Height Regulations 2005.
- The equipment. Module and inverter choice, set out on solar panel comparison and solar inverters for farm buildings.
- Insurance and warranty. What the insurer expects and what the warranties cover are on solar panel insurance and solar panel warranty.
Tax and finance
Qualifying plant and machinery can be written off in the year of purchase under the Annual Investment Allowance (£1 million a year), so the first-year relief is the company’s marginal corporation tax rate multiplied by the qualifying cost. Asset finance and power purchase agreements are the other usual routes. The reliefs and open schemes are set out on grants and funding.
What to ask for before accepting a price
A written proposal that names the module and inverter models, the racking and who has assessed the structure; the price basis and what is excluded; the grid connection route and who pays the DNO; the roof survey result, including asbestos; the warranty terms; and a programme that names its dependencies. Other sizes: 100 kW · 250 kW · 500 kW.
Common questions
How much does a 50 kW farm solar install cost?
The official DESNZ series for 2025/26 gives a non-domestic mean installed cost of £1,167.29 per kW for 10–50 kW systems, which makes about £58,400 for 50 kW before the site-specific items (roof condition, three-phase supply, grid works). It is a baseline, not a quote.
How many solar panels does a 50 kW system need?
About 112 modules of 450 W, which covers roughly 224 m² of roof; module weight alone is about 2.4 tonnes at 21.0 kg a module (Trina Vertex S+ datasheet, 1762 x 1134 mm). Racking and cables add to that, and the roof structure has to carry it.
How much will a 50 kW system generate?
About 45,000 kWh a year at 900 kWh per kWp, a figure that sits between the PVGIS results for Cardiff (946) and Manchester (807) on a 10° roof. Orientation, shading and location move it; the yield guide gives figures by region.
Can I finance a farm solar install?
Capital purchase, asset finance and power purchase agreements are the usual routes; which suits depends on the farm’s capital and tax position. The Annual Investment Allowance gives first-year relief on qualifying plant and machinery, worth the company’s marginal corporation tax rate on the cost in the year of installation. The finance and tax pages set out the detail.