Agricultural Solar Panel Installation in Bristol
Serving Bristol and the wider Bristol area, including Bath, Weston-super-Mare, Portishead.
Agricultural solar panel installation near Bristol comes down to three checks: the roof and its structure, how much of the output the farm uses in the daytime, and the connection to NGED’s South West network. Any array above 3.68 kW per phase needs a G99 application approved before it is switched on.
Farmland around the city is mostly under the neighbouring councils: North Somerset (Portishead, Clevedon and Weston-super-Mare), South Gloucestershire (Yate) and Bath and North East Somerset. That matters for planning, below. This page is independent guidance, not an installer: it sets out what to check, with the source for each figure.
The grid connection: NGED South West and G99
National Grid Electricity Distribution (NGED) runs the South West licence area, which its May 2024 network report describes as extending from Bristol and Bath in the north east to Land’s End, serving about 1.4 million customers. The same report names Bristol, Bath and Weston-super-Mare among its cities and towns and says farming is important to local communities. NGED’s own search settles which operator serves a given farm, and it needs the full postcode: a town or county name returns no result.
NGED’s G99 page sets the route by size:
- G99 applies above 16 A (3.68 kW) per phase. Below that the G98 connect-and-notify route is used.
- Up to 50 kW three-phase (17 kW single-phase) has a simplified application. If the inverter is type tested and listed on the ENA register the form is A1-1; otherwise A1-1 goes in with a compliance form.
- Above 50 kW three-phase uses the G99 standard application form, with parts 1 to 3 completed at application.
- Where the local network is short of capacity, NGED says it offers alternative connections and a study-and-offer approach with options for up to three capacities.
- Commissioning tests are the installer’s job. NGED may witness them for a fee, and its post-acceptance guidance asks for 20 to 25 days’ notice to attend site for energisation and witness testing.
NGED’s pages give no response time for an application, so ask the installer for NGED’s current timescale in writing and what happens to the price if the study finds reinforcement is needed. The process in more detail is on NGED G99 grid connection for farm solar and DNO grid connection for rural farm solar.
Planning for farm roofs near Bristol: Class J and the council that decides
In England a solar array on the roof of a building that is not a house or a block of flats, which includes a farm shed, is permitted development under Class J of Part 14, Schedule 2 of the General Permitted Development Order 2015:
- Up to 50 kW (microgeneration) it is permitted development, within the limits: on a pitched roof the panels may not stand more than 0.2 m proud of the roof plane, and none may sit within 1 m of the roof edge.
- Above 50 kW the council must give a prior-approval decision on the design and appearance, including glare. The old 1 MW cap was removed on 21 December 2023.
- Listed buildings and scheduled monuments are excluded, so a listed barn needs planning permission and listed building consent.
- Designated land does not remove the roof right. The Mendip Hills and Cotswolds National Landscapes are both within reach of Bristol, but the restriction on designated land applies to wall-mounted panels facing a highway, not to roofs.
The council that makes the decision is the one where the building stands, so for most farm roofs near Bristol that is North Somerset, South Gloucestershire or Bath and North East Somerset, and Bristol City Council only inside the city. The wider rules are on planning permission for solar on farm buildings.
Yield: about 1,020 kWh per kWp near Bristol
The European Commission’s PVGIS tool (v5.3, SARAH3 radiation data, 14% system losses, panels at 35 degrees facing south) gives 1,023 kWh per kWp per year at Bristol. On those assumptions a 50 kW roof array would generate about 51,000 kWh a year. A low-pitched or east-west farm roof yields less than a 35-degree south-facing one, so ask for the figure for your own pitch and direction. Compare it with other regions in PVGIS yield for farm roofs by region.
Cost, grants and tax: what is open and what is closed
- Cost. DESNZ’s solar cost data (28 May 2026 release) gives a mean installed cost of £1,288.93 per kW in the South West for 10 to 50 kW systems in 2025/26. It covers MCS installations up to 50 kW on all building types, so a larger farm array is priced from written quotes. How the figure is used is on the farm solar cost guide.
- Grants. GOV.UK’s funding-for-farmers page (updated 1 October 2026, read 12 November 2026) shows no open scheme that funds rooftop solar. The Improving Farm Productivity grant (round 2) named solar PV, with grants of £15,000 to £100,000, and its applications are closed. Capital Grants 2026, the Farming Equipment and Technology Fund and SFI26 are closed too. Plain statement of the position and the alternatives: grants and funding for farm solar.
- Tax. The £1 million Annual Investment Allowance usually gives a business under the limit 100% relief in year one on solar, which HMRC treats as special-rate plant (gov.uk HS252). Onsite renewable plant is also exempt from business-rates valuation in England until 31 March 2035.
- VAT. Installs on farm business buildings pay 20%, reclaimable if the business is VAT-registered; the temporary zero rate does not apply to them. See VAT recovery on farm solar.
- Export. The Smart Export Guarantee pays for what the farm does not use. Suppliers set the rates, and the best open fixed rates read in October 2026 were about 12p to 13p per kWh.
Building types around Bristol
Dairy and livestock buildings use power through the day and suit larger arrays; grain stores have big roofs but seasonal loads. Each building type has its own Bristol page: dairy parlours, livestock sheds, grain stores, poultry sheds, pig units, polytunnels and glasshouses, equestrian arenas and farm workshops. Older roofs raise the next question first.
Questions about farm-building solar around Bristol
Can solar go on an asbestos cement farm roof? Not directly: installers will not normally fix through asbestos cement sheets, so the roof is replaced or overclad first. HSE says most work on asbestos cement is non-licensed provided the people doing it are informed, instructed and trained, and its task sheet A14 asks whether the sheets can be overlaid with non-asbestos material instead of removed. See overclad or strip an asbestos cement farm roof and solar panels on asbestos cement farm roofs.
Does the roof need a structural check? Yes. The module weights, the 15% loading test in Approved Document A and the exemption many agricultural buildings enjoy are set out in solar panel weight and roof loading on farm buildings.
How do I check an installer? Check the MCS register for anything up to 50 kW, the electrical contractor’s NICEIC or NAPIT registration, and ask who submits the G99 application. The checks are in how to choose an agricultural solar panel installer.
Tell us about your Bristol-area farm buildings
Send your details through the quote form and we reply by email. This site is independent guidance, not an installer: the form is the way to describe the buildings, their roofs and the electricity they use.
This page covers solar panels for agricultural buildings across Bristol and Bristol. For how to check and compare any installer, see the guide to UK agricultural solar panel installers.
Postcodes covered in Bristol
- BS1
- BS2
- BS3
- BS4
- BS5
- BS6
- BS7
- BS8
- BS9
- BS10
- BS11
- BS13
- BS14
- BS15
- BS16
Farm building types covered near Bristol
Your installer delivers every farm-building solar PV sub-type across the Bristol agricultural hinterland. Click a building type for full system sizing, payback economics, and a representative install.
Service × Bristol — specific building-type pages
Detailed landing pages for the specific building you're considering, with Bristol-specific cost, payback, and Bristol City Council planning context: