Solar PV for Yorkshire pig unit operations in 2026
Yorkshire commercial farming is shaped by one of England's most varied agricultural regions — East Riding's largest UK arable operations, Yorkshire Dales upland sheep and beef under Harewood and Bolton Abbey tenancies, intensive pig and poultry across the wider region. Pig Unit operations across Yorkshire represent one of the strongest solar PV deployments we deliver — Climate-controlled finisher houses have high year-round ventilation and heating loads. For a typical Yorkshire pig unit install in 2026, expect a system in the 40–250 kW range, project value £36,000–£225,000, simple payback 6 years before tax relief.
Yorkshire-specific pig unit considerations
The combination of Yorkshire's agricultural intensity and the pig unit sub-vertical's specific load profile creates strong economics for solar PV deployment. Most Yorkshire pig unit buildings have ample south- or east-west-facing roof area, structurally adequate cladding (or asbestos cement requiring combined re-roof + PV), and significant on-site electrical baseload that aligns with solar generation. African Swine Fever biosecurity (Pig Health Scheme) strictly observed during install. NVZ (Nitrate Vulnerable Zone) slurry-management compliance unaffected. AHDB pork sustainability framework increasingly references on-farm renewables.
Typical Yorkshire pig unit install
- System size
- 40–250 kW
- Panel count
- 75–460
- Roof area
- 250–1,500 sqm
- Project value
- £36,000–£225,000
- Simple payback
- 6 years
- Annual generation
- 37,000–230,000 kWh
- DNO
- Northern Powergrid
Why Yorkshire pig unit solar makes economic sense
The 2026 economics are dominated by three factors specific to Yorkshire pig unit operations: (1) on-site self-consumption ratio — Pig Unit buildings typically achieve high daytime PV self-consumption thanks to climate-controlled finisher houses have high year-round ventilation and heating loads; (2) Yorkshire regional electricity tariffs sit in the 22–28p/kWh range for commercial supplies, meaning each self-consumed kWh saves 1.5–3× what an exported kWh under SEG returns; (3) 100% Annual Investment Allowance applies to the full capex in year one, delivering effective 25% tax relief for incorporated farms. Combined, these drive payback periods of 6-yr nominal and roughly 4.2-yr after-tax.
Combined re-roof + PV on older Yorkshire pig unit buildings
Many Yorkshire pig unit buildings pre-date 2000 and carry asbestos cement cladding. Under Control of Asbestos Regulations 2012, asbestos cement cannot be retrofitted with PV. The standard solution is a combined re-roof + PV project: HSE-licensed asbestos removal (£30–£50/sqm), profiled steel re-cladding (£45–£80/sqm), then PV install on the new roof. The PV business case routinely pays for 60–100% of the re-roof over the 25-year system life. We've delivered combined re-roof + PV across Yorkshire regularly since 2019.
Yorkshire pig unit solar — key features
- Climate-controlled finisher houses have high year-round ventilation and heating loads
- Farrowing-house heat lamps and creep heaters major winter loads
- Often paired with biogas/AD on intensive sites — PV complements rather than competes
- Red Tractor Pork and RSPCA Assured scheme alignment
How we deliver Yorkshire pig unit solar
Every project starts with a free desk-based feasibility study. Send us your half-hourly meter data and building dimensions; we share an indicative system size, generation forecast, self-consumption ratio, and 25-year financial model within 7 working days. If the numbers work, our engineers visit for a one-day structural and electrical survey. We deliver a fixed-price proposal with full PVSyst yield modelling and DCF financial model. From contract: typical 4–7 months to commissioning for rooftop installs; 6–9 months for combined re-roof + PV. We schedule physical works around the pig unit operation's busy seasons.
For more on pig unit solar generally see our Pig Unit specialist page; for wider Yorkshire farm solar coverage see Yorkshire Farm Solar.
Common questions
How much does a Yorkshire pig unit solar install cost?
Typical Yorkshire pig unit installs in 2026 range from £36,000–£225,000, depending on roof area, electrical capacity and whether re-roofing is required. Cost per kW: £800–£1,000 for sub-100 kW, £750–£900 for 100–250 kW, £700–£850 for above 250 kW. We provide fixed-price proposals within 7 working days of receiving meter data.
Do you cover all Yorkshire farm locations?
Yes — we deliver across the entire Yorkshire agricultural region. Whether your pig unit is in a major town or a remote rural location, we provide the same fixed-price desk feasibility and on-site survey. Most Yorkshire locations are accessible within 60–90 minutes of our base.
What is the Yorkshire grid connection process for pig unit solar?
Northern Powergrid is the regional DNO covering most of Yorkshire. G99 connection timelines run 65–90 working days for technical study, 6–14 months for full connection on most rural feeders. We submit G99 immediately after structural survey to compress timeline. For export-constrained sites we design "no-export" systems sized for self-consumption that connect in 6–8 weeks.
What is the typical payback for Yorkshire pig unit solar?
Simple payback 6 years before tax relief, pulled to approximately 4.2 years after 100% Annual Investment Allowance for incorporated farms at 25% corporation tax. 25-year IRR typically 13–17%.
What grants are available for Yorkshire pig unit solar?
Headline schemes: 100% Annual Investment Allowance (universal); Smart Export Guarantee 8–15p/kWh on surplus; Sustainable Farming Incentive 2025 biodiversity actions; Farming Investment Fund where solar pairs with eligible items (robotic milking, grain dryers). Welsh and Scottish farms have additional devolved schemes.